ZrO2 14.5% Alkali Resistant Glass Fiber Strands in Brunei
You are here: Home » Products » SEO » ZrO2 14.5% Alkali Resistant Glass Fiber Strands in Brunei

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

ZrO2 14.5% Alkali Resistant Glass Fiber Strands in Brunei

ZrO2 14.5% Alkali Resistant Glass Fiber Strands in Brunei . for the glass fiber reinforced cement and develop, generally USES the dry mixing or wet mixing process, add the amount in 1-5%, 50 RPM speed, the mixing time for 20 minutes. Mixed with cement mortar and other materials, it has a good cluster. It is not divided into monofilament, with "Y" type on both ends, which enhances the grip of cement.
  • 12mm

  • YuNiu Fiberglass

  • 20171016-1

Availability:
Quantity:
Product Description

ZrO2 14.5% Alkali Resistant Glass Fiber Strands in Brunei .China Manufacturer Alkali Resistant Glass Fiber Chopped Strands 14.5% Or 16.5% With Long-term   Technical Support .Zor2 14.5% Alkali Resistant (AR) Fiber Glass Chopped Strands in Chile are in the line chopped, the chopped strands include Zro2 16.5% and Zro2 14.5%. It is suitable for reinforcing thermoplastics. It is widely used as raw materials in waterproofing for construction, base material for plastic flooring, air filter-pad material and reinforced gypsum.

Item

Diameter(um)

Chopped Length(mm)

Compatible Resin

AR Fiberglass chopped strands

10-13

12

EP UP

AR Fiberglass chopped strands

10-13

24

EP UP

Competitive advantages of the YuNiu AR glass fiber chopped strands

a.  High temperature stability , low temperature crack resistance

b.  Anti-fatigue performance

c.  Prolong the life of the road

d.  Corrosive resistance

e.  Wearproof and electric insulation

Zor2 14.5% Alkali Resistant (AR) Fiber Glass Chopped Strands in Chile are in the line chopped, the chopped strands include Zro2 16.5% and Zro2 14.5%. It is suitable for reinforcing thermoplastics. It is widely used as raw materials in waterproofing for construction, base material for plastic flooring, air filter-pad material and reinforced gypsum.chopped-Strands-for-concrete2  chopped-Strands-for-concrete3


Product features1.Modest water content.Good flowability, even distribution in finished products.

2.Quickly wet-out, high mechanical strength of finished products.Best cost performance.

3.Good bundling: ensure that the product does not fluff and ball in transit. 

4. Good dispersibility: good dispersion makes the fibers evenly dispersed when mixed with cement mortar. 

5. Excellent physical and chemical properties: it can significantly improve the strength of cement products.

 

Product application

Mainly used in building , electronic , cars and mat raw material. 

In building, length vary from 3mm to 30cm,diameter usually 9-13micron. AR Chopped Strands is suitable for stable buildings, earthquake proof, anti-crack.

In electronic , It’s performance mix with VE, EP, PA ,PP, PET, PBT to achieve. Such as electrical switch box, the composite cable bracket.

In cars, typical example is cars brake pads.Length usually 3mm-6mm,diameter is about 7-13micron.

In felt, chopped strand mat of the length is about 5cm,diameter is 13-17 micron. Needled felt of the length is about 7cm, diameter is 7-9 micron,starch coating.

Concrete用短切丝应用

Packing and shipping

AR Glass Fiber Chopped Strands are packaged in kraft bags or woven bags, about 25kg per bag, 4 bags per layer, 8 layers per pallet and 32 bags per pallet, Each 32 bags of products are packed by multilayer shrink film and packing band. Also the product can be packed as the customers’ reasonable requirements.

Delivery Detail: 15 days after receiving the deposit.

短切丝包装

Product storage

This product should be stocked in dry and cool places. The best condition is within temperature between 15-35℃, with a relative humidity between 30% and 70%. Please keep the product in its original packing before use to avoid moisture.

Previous: 
Next: 

Recommended Products

FAQ

  • Q 6:What's your delivery time for production?

    A:If we have stock , can delivery in 7 days ; if without the stock, need 7~15 days !
    YuNiu Fiberglass Manufacturing
    Your success is our business!
    Any questions, please contact us freely. 

     
  • Q 5:How do you charge the sample fees?

    A: If you need a samples from our stock, we can provide to you for free, but you need to pay the freight charge.If you need a special size, We will charge the sample making fee which is refundable when you place an order.
  • Q 4:When can I offer?

    A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price pls call us or tell us in your email , so that we can reply you priority.
  • Q 3:Package & Shipping?

    A: Normal package:carton(Incuded in the unite price)
    Special Packge: need to charge according the actual situation.
    Normal shipping :your nominated Freight forwarding.
  • Q 2:What's the MOQ?

    Usually 1 Ton.
  • Q 1:Are you a factory? Where are you located?

    We are a manufacturer from China.
 +86-18833998929​​​​​​
  infor1@fiberglassyn.com