 |
YN-CSM-001
YUNIU
2023-0511
| Quantity: | |
|---|---|
Product Description:
Fiberglass Chopped Strand Mat is made of E Glass or C Glass fiberglass Chopped Strands of 50mm length, which are randomly distributed and bonded bound together with polyester binder in powder or emulsion form, trimmed at the two edges. The mats are compatible with unsaturated polyester, vinyl ester and other various resins.It’s mainly used in hand lay-up, filament winding and compression molding processes. The typical FRP products are panels, tanks, boats, complete set of sanitary equipment, automotive parts, cooling towers, pipes etc.
Product Specification:
Item | Standard weight(g/m2) | Width(mm) | Loss on ignition (%) | Moisture (%) | Compatible resins |
EMC225 | 225 | 1040/1270/2080 ≤3300 | 2-6 | ≤0.2 | UP VE |
EMC300 | 300 | 1040/1270/2080 ≤3300 | 2-6 | ≤0.2 | UP VE |
EMC450 | 450 | 1040/1270/2080 ≤3300 | 2-6 | ≤0.2 | UP VE |
EMC600 | 600 | 1040/1270/2080 ≤3300 | 2-6 | ≤0.2 | UP VE |
Packing：
Chopped strand mat is wound on a cardboard tube, then wrapped by polyethylene bag, finally packed into a suitable carton. According to customers’ requirements, the product can be shipped with carton packaging and pallet packaging. Pallet packaging consists of 16 cartons.
Storage：
This product should be stored in dry and cool places. The best condition is with temperature between 35 ℃ and 35 ℃, with a relative humidity between 30% and 70%. Please keep the product in its original packaging before use.
Product advantages：
1.Randomly dispersed and excellent mechanical properties
2.Excellent compatibility with resins, clean surface
3.Excellent heating resistance
4.Fast and well wet-out rate
5.Good molding property and adapt to complex shapes
Product Application：
