Direct Sale Chopped Strands for Concretein Columbia 
You are here: Home » Products » Fiberglass Chopped Strands » AR Chopped Strands » Direct Sale Chopped Strands for Concretein Columbia 
Share to:

Direct Sale Chopped Strands for Concretein Columbia 

China Supply AR Glass Fibre Chopped Strands generally USES the dry mixing or wet mixing process, add the amount in 1-5%, 50 RPM speed, the mixing time for 20 minutes. Mixed with cement mortar and other materials, it has a good cluster. It is not divided into monofilament, with "Y" type on both ends, which enhances the grip of cement.
  • 12mm
  • YuNiu Fiberglass
  • 20171016-1
Product Description

China supplies reinforced glass chopped strands. Chinese manufacturers alkali-resistant glass chopped strands 14.5% or 16.5% long-term technical support. Zor2 Colombia 14.5% alkali-resistant (AR) glass chopped strand chopped and crushed strands including Zro2 16.5% and Zro2 14.5%. It is suitable for reinforcing thermoplastics. Widely used as construction waterproof raw material, plastic floor base material, air filter mat material and reinforced plaster.



Chopped Length(mm)

Compatible Resin

AR Fiberglass chopped strands




AR Fiberglass chopped strands




Competitive advantages of the YuNiu AR glass fiber chopped strands

a.  High temperature stability , low temperature crack resistance

b.  Anti-fatigue performance

c.  Prolong the life of the road

d.  Corrosive resistance

e.  Wearproof and electric insulation

Zor2 14.5% Alkali Resistant (AR) Fiber Glass Chopped Strands in Chile are in the line chopped, the chopped strands include Zro2 16.5% and Zro2 14.5%. It is suitable for reinforcing thermoplastics. It is widely used as raw materials in waterproofing for construction, base material for plastic flooring, air filter-pad material and reinforced gypsum.chopped-Strands-for-concrete2  chopped-Strands-for-concrete3

Product features1.Modest water content.Good flowability, even distribution in finished products.

2.Quickly wet-out, high mechanical strength of finished products.Best cost performance.

3.Good bundling: ensure that the product does not fluff and ball in transit. 

4. Good dispersibility: good dispersion makes the fibers evenly dispersed when mixed with cement mortar. 

5. Excellent physical and chemical properties: it can significantly improve the strength of cement products.


Product application

Mainly used in building , electronic , cars and mat raw material. 

In building, length vary from 3mm to 30cm,diameter usually 9-13micron. AR Chopped Strands is suitable for stable buildings, earthquake proof, anti-crack.

In electronic , It’s performance mix with VE, EP, PA ,PP, PET, PBT to achieve. Such as electrical switch box, the composite cable bracket.

In cars, typical example is cars brake pads.Length usually 3mm-6mm,diameter is about 7-13micron.

In felt, chopped strand mat of the length is about 5cm,diameter is 13-17 micron. Needled felt of the length is about 7cm, diameter is 7-9 micron,starch coating.


Packing and shipping

AR Glass Fiber Chopped Strands are packaged in kraft bags or woven bags, about 25kg per bag, 4 bags per layer, 8 layers per pallet and 32 bags per pallet, Each 32 bags of products are packed by multilayer shrink film and packing band. Also the product can be packed as the customers’ reasonable requirements.

Delivery Detail: 15 days after receiving the deposit.


Product storage

This product should be stocked in dry and cool places. The best condition is within temperature between 15-35℃, with a relative humidity between 30% and 70%. Please keep the product in its original packing before use to avoid moisture.