  infor1@fiberglassyn.com       8618833998929       
60gsm Fiberglass Mesh (2.85×2.85mm | 2.05m×300m): High-Performance Carpet Backing Reinforcement for Manufacturers in Thailand
You are here: Home » News » Product knowledge » 60gsm Fiberglass Mesh (2.85×2.85mm | 2.05m×300m): High-Performance Carpet Backing Reinforcement for Manufacturers in Thailand

60gsm Fiberglass Mesh (2.85×2.85mm | 2.05m×300m): High-Performance Carpet Backing Reinforcement for Manufacturers in Thailand

Views: 261111     Author: Site Editor     Publish Time: 2026-11-11      Origin: Site

fiberglass mesh4

The Critical Need for Dimensional Stability in Tropical Carpet Manufacturing

Thailand is a major manufacturing and export base for commercial carpets, residential floor coverings, and modular carpet tiles in Southeast Asia. In tropical climates characterized by high ambient humidity and heat, carpets face severe structural challenges. Traditional unreinforced latex or bitumen backing compounds often undergo thermal expansion and moisture absorption, leading to carpet warping, edge curling, seam delamination, and premature wear in high-traffic hotels and commercial offices.

To eliminate edge curling and enhance secondary backing adhesion without adding excessive weight, modern carpet and rug manufacturers integrate ultra-lightweight Alkali-Resistant Fiberglass Reinforcement Mesh into the coating compound layer during automated continuous lamination.

网格布工厂图 (7)Grade A Fiberglass Mesh

Project Overview: Tailored Carpet Backing Mesh Supply for a Thai Manufacturer

Recently, a prominent carpet and flooring manufacturer based in Samut Prakan, Thailand, partnered with YUNIU (NIU FIBERGLASS) to source precision-engineered fiberglass backing mesh for their automated broadloom and carpet tile coating lines.

The client required a mesh with consistent square openings for controlled latex strike-through, high tensile strength to prevent edge curling, and extra-wide roll dimensions to minimize edge scrap and changeover downtime. Following trial line evaluations, the manufacturer confirmed regular containerized orders for YUNIU 60gsm Fiberglass Carpet Backing Mesh (2.85×2.85mm, 2.05m×300m).

Precise Technical Specifications Ordered

The consignment was manufactured under strict tension and coating tolerance controls to ensure seamless machine runnability:

  • Product Name: Fiberglass Mesh for Carpet Backing & Flooring Reinforcement

  • Unit Weight: 60gsm (g/m2g/m2, ±3g±3g)

  • fiberglass meshMesh Opening Size: 2.85mm × 2.85mm (Square weave opening)


  • Roll Width: 2.05 meters (Custom wide width matching 2.0m–2.05m carpet coating lines)

  • Roll Length: 300 meters (Jumbo roll format for continuous production)

  • Yarn Type: High-strength C-Glass / E-Glass continuous twisted yarn

  • Coating Formulation: SBR/Acrylic compatible polymer emulsion (Ensures strong thermal bonding with backing latex, PVC, or bitumen)

  • Tensile Strength (Warp / Weft): ≥650 N/50mm / ≥700 N/50mm≥650 N/50mm / ≥700 N/50mm

  • Color: Standard White

  • Packaging: Heavy-duty PE moisture-proof inner film + Reinforced end core plugs + Palletized for sea container transport

Why the 60gsm (2.85×2.85mm, 2.05m×300m) Specification for Carpet Backing?

This tailored specification provides carpet manufacturers with vital production and quality advantages:

  1. Controlled Latex Strike-Through (2.85×2.85mm Mesh):

    • The precise 2.85×2.85mm square aperture allows SBR latex, PVC plastisol, or hot-melt bitumen to penetrate evenly during roller lamination. This locks the primary tufted yarn loops firmly while saving approximately 8% to 10% of excess adhesive compound.

  2. Anti-Curling & Zero Moisture Expansion:

    • Inorganic fiberglass filaments absorb zero moisture and feature an extremely low thermal expansion coefficient. Embedded in the secondary backing, the mesh acts as a rigid dimensional skeleton that keeps carpets completely flat and prevents edge curling even in tropical Thai humidity.

  3. 2.05m Extra-Wide Format (Zero Edge Waste):

    • Directly matches standard 2.0m to 2.05m carpet coating machinery, eliminating manual trimming scrap and reducing raw material waste.

  4. 300m Jumbo Roll Efficiency:

    • Cuts roll changeover downtime by two-thirds compared to standard 100m rolls, significantly boosting continuous daily line output and eliminating splice-related line jams.

  5. Clean Feed Without Wrinkling or Fraying:

    • Automated tension-controlled polymer coating locks the warp and weft intersections tightly, preventing grid skewing or edge fraying when pulled through high-speed tension rollers and drying ovens.

fiberglass meshfiberglass mesh3fiberglass mesh 1fiberglass mesh2

Manufacturing & Supply Strength: Why Source from YUNIU?

With over 24 years of specialized fiberglass manufacturing heritage based in Xingtai, China, YUNIU provides reliable B2B supply solutions for industrial flooring manufacturers:

  • Custom Wide-Width Looms: Capable of producing custom widths from 1.0m up to 2.2m, and jumbo rolls up to 500m length.

  • Strict Quality Consistency: Automated laser areal weight monitoring ensures uniform 60gsm grammage and consistent coating uptake across every meter of the roll.

  • Direct Logistics to Thailand: Direct shipping routes connecting Chinese ports to Bangkok Port and Laem Chabang Port ensure stable 10–14 day transit times and secure seaworthy packaging.

  • Comprehensive Testing Support: Every production batch includes a Certificate of Analysis (COA) confirming tensile strength, weight tolerance, and grid stability.

Conclusion

For industrial carpet and flooring manufacturers in Thailand and Southeast Asia, YUNIU 60gsm Fiberglass Carpet Backing Mesh (2.85×2.85mm, 2.05m×300m) delivers factory-direct cost competitiveness, proven anti-curling stability, and seamless machine runnability. Partner with YUNIU to enhance your carpet production efficiency and product quality.


#FiberglassMeshforCarpetBacking #60gsm2.85x2.85mmFiberglassMesh #2.05mWidthCarpetReinforcementMesh #Anti-CurlingSecondaryCarpetBackingFabric #YUNIUFiberglassMeshFactory


Factory
No.1 South Of Qianying Village.East Of Guangming Road,Rencheng Town,Renze District, Xingtai City, Hebei Province,China
 +86-18833998929​​​​​​
  infor1@fiberglassyn.com
 +86-18833998929​​​​​​
  infor1@fiberglassyn.com