Characteristics and classification of aluminum foil fiberglass cloth tape

The aluminum foil fiberglass cloth tape uses high-quality pressure-sensitive adhesive, which has good adhesion and strong adhesion, which can greatly improve the insulation performance of the product. It is generally used for joint bonding, sealing of puncture points of insulation nails and repairing damage. It is a necessary raw material for manufacturers of refrigerators and freezers, and it is also a necessary raw material for the distribution department of insulation materials.

Performance characteristics and classification of glass fiber cloth aluminum foil tape

1. Features:

1. The anti-corrosion performance is greatly improved: the surface of the glass fiber cloth aluminum foil is treated with a special anti-corrosion coating, and the anti-corrosion performance is greatly improved. At the same time, the polyethylene hot-air pasting method is adopted, and no composite adhesive is needed, which avoids the hidden danger of corrosion and mildew on the surface of the aluminum foil caused by the residual moisture or solvent of the adhesive during the composite process.

2. Direct hot pressing and compounding, eliminating the need for compound adhesives and saving the cost of veneer compounding.

3. The water vapor permeability is smaller, and the water vapor barrier effect is strengthened: the heat-sealed polyethylene layer in the middle of the glass fiber cloth aluminum foil is thicker than the general veneer, and the water vapor permeability is smaller, so the water vapor barrier effect is better and the glass is reliably protected. Thermal insulation materials such as cotton.

4. Better tensile strength and firmer veneer: Glass fiber cloth aluminum foil has higher mechanical strength than reinforced aluminum foil, and is more suitable for online bonding in glass wool factories, rock wool factories, and mineral wool factories.

5. Smoother veneer, reducing the chance of surface damage to the aluminum foil: glass fiber cloth aluminum foil has a finer cloth, thick polyethylene layer, smoother veneer, and the surface of the aluminum foil is not susceptible to friction damage, thus better playing a water vapor barrier function .

2. Purpose:

It is suitable for the splicing of pipe seals, heat insulation and water vapor barrier of HVAC ducts, heating and cooling water pipes, especially for pipe sealing in the shipbuilding industry. Aluminum foil fiberglass cloth tape is widely used for explosion-proof adhesive surfaces of stoves, and large-scale air duct heat preservation veneers. The constant power or variable power electric heating mat heating system includes a heating cable, a glass fiber net and a thermostat. The heating cable is bent and fixed on the net with adhesive tape according to the thermal design. The variable power (self-limiting) mat can be used On the mobile electric heating floor, the mat is equipped with a negative ion far-infrared ecological function reflective layer (aluminum foil glass fiber cloth), heat insulation layer (pixel sheet), bottom layer (non-woven fabric) and a craft decorative surface layer. It is hard or soft. This structure allows simple self-service laying, installation and use, without worrying about the thermal and electrical design and construction of the heating cable, and suitable installation plans are available before and after interior decoration. It has the advantages of moisture-proof, air-tight, shading, abrasion-resistant, fragrance-preserving, non-toxic and tasteless. If this composite aluminum foil material is used to package retort food, it can at least guarantee that the food will not deteriorate for more than one year. The aluminized film has good fragrance retention, metallic luster, beautiful decoration, but opaque, unintuitive packaging contents, poor resistance to flexure, and pinholes or cracks after kneading, which affects barrier properties. Aluminized film is divided into hard aluminum foil and soft aluminum foil.

Aluminum foil fiberglass cloth is made of aluminum foil and fiberglass cloth combined with adhesive. Glass fiber cloth aluminum foil tape has excellent water vapor barrier properties, extremely high mechanical strength, and oxidation resistance, strong cohesion, corrosion resistance, and weak acid and alkali resistance.

Aluminum foil fiberglass cloth tape is suitable for the splicing of pipe seals, the insulation of HVAC ducts, heating and cooling water pipes and water vapor barrier requirements, fixing, anti-electronic interference, isolating electromagnetic waves, engineering industry, and the insulation of various electronic equipment.

Hebei Yuniu Fiberglass Manufacturing Company Limited is a fiberglass material manufacturer with over 10-year experience, 7- year exporting experience.

We are manufacturer of fiberglass raw materials, Such as fiberglass roving, fiberglass yarn, fiberglass chopped strand mat, fiberglass chopped strands, fiberglass black mat, fiberglass woven roving, fiberglass fabric, fiberglass cloth..And so on.

If any needs, please contact us freely.

We will do our best to help and support you.